CES-6410 Hardware Configuration:
CPU: Samsung S3C6410X, ARM1176JZF-S, clocked at 667MHz
Mobile DDR SDRAM: Standard 256Mbytes DDR SDRAM, optional 128MB ~ 512MB
FLASH: Standard 1GB SLC NAND FLASH, optional MLC NAND Flash: 1G/2G/4G/8G
Core board power : selection of cost-effective background torex companys DC / DC power supply
Clock circuit : use active and passive crystal crystal oscillator circuit combining
Interface Circuit : High-precision sockets (1.27MM pitch ) connected with the bottom
Can connect a keyboard, mouse ith a scan button
LCD LCD touch screen: use the latest 7-inch LCD touch-screen display , four-wire resistive touch screen
WiFi wireless Internet module : Taiwan company USI module WM-G-MR-09, the chip is arvell88W8686,fully compatible with IEEE802.11b / g international standard , SDIO interfaces , 802.11g: 54,48,36,24,18,12, 9,6 Mbps speed automatic adjustment 802.11b: 11,5.5,2,1 Mbps speed automatic adjustment
GPS Navigation Module: SIRF Star III module sensitivity: when tracing is -159dBm, captured as -144dBm
3G Module: use WCDMA module
VGA display interface circuit : The super special chip, designed for use VGA ,VGA interface can be directly
connected to a variety of CRT monitors or LCD display , adjustable contrast.
USB OTG: One USB OTG interface with On-The-Go supplement to the USB 2.0 specification(Revision1.0a) standard , supports up to 480Mbps high-speed transmission
USB HOST: Four USB HOST, which can take a variety of USB devices to meet the expanding needs of the platform, in line with USB Rev1.1 standard ,supports full-speed (12Mbps) or low-speed (1.5 Mbps) transmission
TV OUT circuits: a road, a composite video signal output , support for NTSC-MNTSC-J, PAL-/D/G/H/I, PALM, PAL-Nc, the display signal directly to a variety of AV input interfaces equipment.
TV IN interface: 1 channel analog video input port can be connected to a variety of composite video input signal
Ethernet port : 1 channel 10M/100M Ethernet port, using DM9000AE, with connectivity and transmission indicator
HSMMC card interface : 1 channel high speed MMC card interface with Specificatio (ver2.0)/High Speed
MMCSpec (4.2) standard , compatible SD/MMC/MMC4.0/TF card
SD card interface : 1 channel ordinary SD card interface
Audio circuitry : a road AC97, wolfs WM9713, stereo audio output interface can be connected to headphones or speakers; support recording, backplane interface can be connected to the audio input microphone , and comes with a microphone
Amplifier circuit : using a dedicated chip , can drive 8 ohms , 2W speakers, panel comes with twospeakers, can play stereo
CMOS Camera Module:a socket for 2.0mm pitch double camera expansion , this expansion interface
can be connected to other types of CMOS Sensor camera supports standard ITU-RBT. 601/656 YCBCR
8-bit standard
Four serial ports , baud rate typically 115200bps, where a five-wire serial port baud rate up as a programdebugging 115200bp; 3 multiplexed serial port , GPS and other devices multiplex
RTC clock: internal real-time clock ( with back-up lithium battery ) , can work for two years , no need to replace batteries
Keyboard: 2 * 8 keyboard scan
LED: Power and several indicator lights
Reset circuit : manual reset and reset the combination chip , chip MAX811, reliable reset
Power Interface : 12V power supply, with power switch and indicator light
Extensions: external interrupt button , A / D converter input , a GPIO control buzzer
CES-EDU6410 software configuration:
Embedded Windows CE 6.0 R3 operatingsystem:
TV OUT driver: NTSC, PAL TV out(with Image Enhancement)
VGA:640*480px
SD/MMC Interface: Support high speed SD/MMC Card
Ethernet module:10M/100M adaptive network port driver
LCD Display: The default support 800 * 480 resolution
AUDIO driver: Support Ac97
Camera driver: Support OV9650 camera module
WI-FI driver: Support 802.11b/g
GPS driver: Support SIF III Global Positioning
MFCdriver: Multi Format CODEC(H.264/MPEG4/VC1)
post processor driver: Video Post Processor
JPEG driver: JPEG CODEC
TV OUT driver: NTSC, PAL TV out(with Image Enhancement)
2D driver: 2D Graphics driver
3D driver: 3D Graphics
USB HOST driver: U disk
UART driver: Support 4 Serial
NAND FLASH driver: 1GBytes
DDR driver: 128/256Mbytes
TOUCH driver: Four-wire resistive touch screen driver
Keypad driver: Support 2*8 button scanning
RTC driver Support real time clock
Support MP3 and Mp4video playback
Support multiple network applications, such as HTTP
Google Android 2.1 operating system:
Kernel:Linux 2.6.29
The System Leading Process: u-boot-1.1.6
debugging tool: DNW v0.60C
Cross Compile: Cross-4.2.2-eabi, 4.3.1-eabi-armv6
The Document System: Ramdisk,Yaffs2
GUI:Android2.1,eclair
SD/MMC driver: Support high speed SD/MMC Card
LCD driver : Default resolution800*480
AUDIO driver : Wm9713
NAND FLASH: 1GBytes
DDR driver: 256 Mbytes
TOUCH driver: Four-wire resistive touch screen driver
Keypad driver: Support 2*8 button scanning
WIFIdriver: Support 802.11b/g
GPS driver: Support SIF III Global Positioning
3D driver: 3D Graphics
USB HOST driver: U disk
USB OTG: Support and Windows host connection, file transfer
Linux 2.6.28 operating system:
Kernel:Linux 2.6.28
The system Leading Process: u-boot-1.1.6
debugging tool: DNW v0.60C
Cross compile: cross-4.2.2-eabi, cross-3.4.1, cross-3.3.2
The Document System: YAFFS2
GUI:Qtopia 1.7
SD/MMC driver: Support high speed SD/MMC Card
Ethernet module: 10M/100M adaptive network port driver
LCD driver: Default resolution 800*480, support resolution 480*272
AUDIO driver: Support AC97
USB HOST driver: U disk
UART driver: Support 4 Serial
NAND FLASH driver
DDR driver
TOUCH driver: Four-wire resistive touch screen driver
MFC driver: Multi Format CODEC (H.264/MPEG4/VC1)
Post process driver: Video Post Processor
JPEG driver: JPEG CODEC
TV OUT driver: NTSC, PAL TV out (with Image Enhancement)